Widgetized Section

Go to Admin » Appearance » Widgets » and move Gabfire Widget: Social into that MastheadOverlay zone

A Bunch Of Wrap-Up Gun Thingies For The Week…

Share This:

1) Mo’ Rugers! Mo’ Rugers! Mo’ Rugers! Ruger has announced an American .45 Compact. I like the compact 9mm a lot, so I would expect this one to be every bit as good. I assume Brother Ed Head has a review spinning up for DRTV. Ruger also announced 2 more versions of their MK IV .22 pistols, a 22/45 Tactical, based on the upgraded model with the removable grip panels, and a MK IV Competition, which I have on the way to me this week.

This is the pistol I alluded to on Wednesday’s podcast. Am looking forward to shoot more Rimfire Challenge this year, and after shooting the Mk IV Hunter version for SHOOTING GALLERY this season, I really want to put the Competition model through the paces. Should be here today or early next week.

It will be fitted with an RDS for this season…

2) Here’s Version 3.0 of my EDC:

You may ask yourself why so many versions. Valid question. Just before a match I tanked my untankable Trij RMR06 on my competition USPSA Carry Optics gun. By tanked I mean it stopped holding zero and battery life dropped to minutes…obviously a sick puppy! Plan A was to pop an RMR off one of my other guns, bolt it onto the Suarez G19 I compete with and be good to go. Then Mr. Ham-Hands himself stripped one of the screws holding the RMR in place (Oh come on! Don’t you dare tell me you’ve never stripped a little screwhead!).

Rather than stick with my original plan of screaming and pulling my hair out, I shifted gears on EDC back to my RMR-equipped G26 (not exactly a huge change, to be sure, since my EDC has a G26-sized frame anyway…I didn’t even have to change magazines), pulled the slide off the EDC G19 — a very old Glock slide fitted with a first generation Leupold DeltaPoint, and went to the match.

I had always intended to go to a different slide/optic on the ROBAR-build frame, but it was on the back burner. Since I had pieces of Glock scattered all over the place, I decided to move that plan up. I talked to Gabe Suarez and had Suarez International build me up one of their G19 slides in grey with an RMR06 and stacked night sights front and rear. I added a stock barrel and recoil spring assembly. I’ll start testing on it today. Once I get around 200 rounds though it, I’ll place it into service. BTW, here’s a great round-up of Glock barrels from the Victory Gun Blog. I run a Wilson Combat barrel in the competition G19, and it is noticeably different, especially with the Wilson Signature 125-gr Match ammo. If the barrels ever come back into stock, I might even buy a spare! LOL!

And yes, any RDS-equipped firearm that I use for carry is equipped with BUIS!

3) In our Hand Me the Mallet Department.. this left me to fix my ham-handed stupidity on the competition gun. Above all things I hate tapping out screws and bolts, especially little bitty screws and bolts. Amazon to the rescue! I have Craftsman bolt and screw removers, but I took a quick look for something a little smaller. I came across Alden MicroGrabits, cutter on one side, extractor on the other. A little pricey, but it looked like what I was looking for. Boom! easiest extraction I’ve ever done! These things rock…dentists ought to use them. Will have my Trij boxed up and on the way to service today. Meanwhile, I’ll stick with the competition set-up I have now.

4) I’ll be doing a little big bore stuff next week, working with .44 Magnum single actions for upcoming SGO episode. I admit that part of this is driven by Max Prasac’s book I talked about in a previous post. I realized that it has been a while since I worked with the single action blasters, and I kinda missed it. I’m even itching to do some .44 Magnum reloading…maybe it’s spring in the air…or a virus of some kind.

5) And one more gun lust point…heard from Big Horn Armory this morning that they are now offering their achingly beautiful big bore lever guns in a 16-inch barreled Trapper version.

This is from the presser:

Trapper carbines retain all of the features of the Models 89, 90 and 90A that have made them a resounding hit with hunters and woodsmen who desire a fast-handling powerful repeating rifle that can deliver multiple shots faster than the traditional bolt-action rifle. Receivers and barrels are made from 17-4 stainless steel CNC machined to the tightest tolerances in the industry. All components are made in the USA and assembled by a well-trained staff of gun makers in Cody, Wyoming. Stocks are made from selected American black walnut superbly fitted to the metalwork and checkered to 20 lpi, capped with a 1-inch recoil pad. The generous finger lever accommodates the largest hands even with gloves. Big Horn Armory rifles have the nearly bomb-proof Skinner Sights aperture adjustable for windage and elevation and a post front sight.

In either .500 S&W Magnum, .460 S&W Magnum or .454 Casull…sigh…it would only make my pre-’64 Winchester 94 30-30 jealous!

(Visited 720 time, 1 visit today)

One Response to A Bunch Of Wrap-Up Gun Thingies For The Week…

  1. Walter_Lars

    March 10, 2017 at 4:04 pm

    The Bighorn in 460 S&W
    how well will it feed 454 Casul or 45 Colt ?

Click on a tab to select how you'd like to leave your comment

Leave a Reply

Your email address will not be published. Required fields are marked *