![\"\"](\"https:\/\/www.downrange.tv\/blog\/wp-content\/uploads\/2017\/08\/Colt1911GunSite-F.jpg\")
The Gunsite Lightweight Commander<\/b><\/p>\nJeff Cooper and I were sitting in front of the fireplace in his home, he in his favorite chair and me on the couch to his left. As we sat we un-holstered our pistols and set them down on the end table as a concession to Mrs. Cooper, who didn\u2019t much like pistols tearing or smudging her upholstery. We spoke about 1911 pistol reliability and Jeff said the smaller you make a 1911 the harder it is to get it to work. He offered his opinion that the Commander sized guns were \u201cjust right\u201d considering reliability and ease of carrying. Thinking back on that conversation and the many times I saw Jeff at Gunsite, I can\u2019t remember a time he wasn\u2019t wearing a pistol and that pistol was invariably a Commander in a Yaqui slide holster. After many years of carrying, shooting and teaching with 1911s I\u2019ve come to the same conclusion \u2013 the Commander is just right and my favorite Commanders are Lightweights.<\/p>\n
Join me for a short journey in the way back machine to understand the origins of the Colt Lightweight Commander. The year was 1949, the Second World War had ended four years earlier and the Army wanted a compact, lightweight pistol chambered in 9mm to issue to officers. Go figure. This prompted Colt to invent their first aluminum alloy framed pistol and they called it the Colt Commander. Initially chambered in 9mm the 4.25\u201d barreled 1911 was produced in 9mm, .45ACP and 38 Super the first year of production, that being 1950. Fast-forward twenty years to 1970. Colt introduced an all steel version called the Combat Commander and renamed the aluminum framed pistol the Lightweight Commander. And that\u2019s where it stands today; steel framed pistols are Combat Commanders and aluminum framed pistols are Lightweight Commanders.<\/p>\n
You wouldn\u2019t think reducing the barrel and slide length by three quarters of an inch and the weight by about three quarters of a pound would make much of a difference, but it does. To me, LW Commanders seem to look better, balance, feel better in the hand and carry more discretely than full size 1911 pistols. While most 5\u201d 1911s weigh around 36 ounces, LW Commanders weigh about 25 ounces. This translates into the LW pistols being easier to carry and (perhaps) quicker to draw and point but a little tougher to shoot well if you\u2019re bothered by recoil. Shooting a LW in .45ACP isn\u2019t painful, like shooting a 12 ounce .357 Magnum revolver, but they do move a little more in recoil. A powerful grip and shooting stance can mitigate this but there\u2019s no doubt the Lightweights jump around more than heavier pistols. <\/p>\n
The Gunsite Lightweight Commander<\/b><\/p>\n
At one time Gunsite was in the custom pistol business but in recent years the school has worked with manufacturers, principally Colt, to make pistols built to Gunsite\u2019s specifications. The latest in this series is the new Colt Gunsite Lightweight Commander. How is the Gunsite pistol different from the standard Colt item? To begin with, the Gunsite pistol uses the Series 70 fire control system, meaning there is no firing pin safety as found in the Series 80 Colts. The Gunsite pistol ![\"\"](\"https:\/\/www.downrange.tv\/blog\/wp-content\/uploads\/2017\/08\/Colt1911GunSite-5-300x239.jpg\")
comes with thin, checkered stocks in, I think, rosewood, and a short, solid trigger. Gold Cup style serrations are added to the front strap and the mainspring housing and the front strap is relieved behind the trigger guard for a higher grip. Sights are genuine Novak with a plain black Low-Mount rear and a white dot night sight front. The stainless steel barrel is marked NM, for National Match and I understand these pistols are assembled and fitted by the Colt Custom Shop. Like the standard model, the Gunsite version uses Colt\u2019s new double recoil spring. The Gunsite pistols have a unique serial number prefix, CGLC, standing for Colt Gunsite Lightweight Commander. The left side of the slide is marked \u201cColt Gunsite Pistol\u201d and includes the Rampant Colt trademark. The right side of the slide is marked Lightweight Commander\u201d followed by the Gunsite Raven trademark. The pistol comes with two 8 round magazines, an instruction manual and the usual government mandated padlock. <\/p>\n
According to my postal scale the Gunsite pistol has a bare weight, no magazine, of 27 ounces. Comparing it to my pre-70 Commander, the old pistol weighs 24 ounces, with the slide accounting for a 1 ounce difference and the frame for 2 ounces. The trigger on my Gunsite pistol breaks crisply at just over 5 pounds, with no creep or over travel. It\u2019s a good trigger that would be perfect if it broke at 3.5 to 4 pounds. While the stocks that come with the pistol are very nice I couldn\u2019t resist switching them to a set with the Gunsite Raven logo \u2013 because it seemed like the right thing to do with a Gunsite pistol. <\/p>\n
![\"\"](\"https:\/\/www.downrange.tv\/blog\/wp-content\/uploads\/2017\/08\/Colt1911GunSite-4.jpg\")
\nAt the range I took the pistol out of the box, loaded the magazines with 230 grain full metal jacket .45ACP ammunition and shot the Dot Torture Drill. This 50 round drill, shot at only 3 yards with no time limit, is indeed tortuous. Fortunately the Gunsite pistol and I were up to the task and I managed to clean Dot Torture. ![\"\"](\"https:\/\/www.downrange.tv\/blog\/wp-content\/uploads\/2017\/08\/Colt1911GunSite-2-199x300.jpg\")
Considering the Gunsite pistol is an optimized defensive pistol I next ran every defensive .45ACP load in the ammo bunker through the pistol in a variety of combative shooting drills. The LW Colt ate this ammunition without complaint. The two loads I have that sometimes choke 1911 pistols are Remington target wadcutters and Federal 185gr. Match hollowpoints, sometimes called the flying ashtray for their huge hollowpoint cavity. Happily, the Gunsite pistol consumed these loads without a hitch. <\/p>\n
Next, I asked my friend Rob Leahy at Simply Rugged Holsters to make me a fancy carry rig. Using Mojave Rattlesnake skin inlays from a snake taken at Gunsite, Rob built me a beautiful holster and magazine pouch of his Cuda holster design. Aside from looking terrific, this rig is an extraordinary design for concealed carry. I\u2019ve been wearing it and carrying the Colt Gunsite with nothing more than a baggy t-shirt as a cover garment and it is secure, fast, comfortable and very concealable. This rig, being too pretty to conceal has become my new BBQ\/Party Pistol setup.<\/p>\n
![\"\"](\"https:\/\/www.downrange.tv\/blog\/wp-content\/uploads\/2017\/08\/Colt1911GunSite-3.jpg\")
\nWith a retail price about $600 more than the standard Colt model the question becomes, is the Gunsite pistol worth the extra cost? Considering it\u2019s a limited edition instant collectible with some unique features, that\u2019s a perfected defensive pistol, my answer is \u201cYes.\u201d You\u2019ll have to decide for yourself – I\u2019ve got mine, serial number 8, the same number as my Border Patrol call sign \u2013 and you can get yours by calling the Gunsite Academy ProShop at 928-636-4565. The line starts to the left\u2026<\/p>\n
For more information:<\/p>\n
![\"\"](\"https:\/\/www.downrange.tv\/blog\/wp-content\/uploads\/2012\/03\/EdHead.jpg\")
Ed Head is a regular on Shooting Gallery, Gun Stories and Down Range TV. He has worked for almost 30 years in law enforcement, first in the United States Air Force and then with the United States Border Patrol, retiring as a Field Operations Supervisor. During his Border Patrol career, Ed worked in a variety of patrol, investigative and training capacities. Ed has an extensive background as a firearms instructor, having trained thousands, ranging from beginners to police, military and special operations personnel. Having taught at Gunsite for 20 years, Ed first trained there under the world famous shooting school’s founder, Jeff Cooper, then later ran the school as the operations manager for more than five years. Ed lives in Chino Valley, Arizona, where he continues to teach and write.<\/em><\/p>\n","protected":false},"excerpt":{"rendered":"