Author Topic: 3D printed suppressor for sale  (Read 5670 times)

Big Frank

  • NRA Benefactor Member
  • Top Forum Member
  • *****
  • Posts: 9463
  • DRTV Ranger
  • Liked:
  • Likes Given: 1048
3D printed suppressor for sale
« on: October 31, 2017, 01:03:20 PM »
Daniel Defense is making a pair of suppressors that are 3D printed Inconel, stainless steel, and titanium. The new baffle design is supposed to work better than simpler style baffles. The baffles and tube are a single piece of Inconel so there are no welds that could possibly break. They're good for anything from 5.56 to .300 Win Mag. and come in a quick-detach and a direct-thread version. https://danieldefense.com/wave
""It may be laid down as a primary position, and the basis of our system, that every Citizen who enjoys the protection of a free Government, owes not only a proportion of his property, but even his personal services to the defence of it, and consequently that the Citizens of America (with a few legal and official exceptions) from 18 to 50 Years of Age should be borne on the Militia Rolls, provided with uniform Arms, and so far accustomed to the use of them, that the Total strength of the Country might be called forth at a Short Notice on any very interesting Emergency." - George Washington. Letter to Alexander Hamilton, Friday, May 02, 1783

THE RIGHT TO BUY WEAPONS IS THE RIGHT TO BE FREE - A. E. van Vogt, The Weapon Shops of Isher

alfsauve

  • Semper Vigilantes
  • Top Forum Member
  • *****
  • Posts: 7183
  • DRTV Ranger
  • Liked:
  • Likes Given: 447
Re: 3D printed suppressor for sale
« Reply #1 on: October 31, 2017, 04:31:44 PM »
Wonder how long it takes to print each suppressor?

Now if we just got them off the NFA list.


Will work for ammo
USAF MAC 437th MAW 1968-1972

PegLeg45

  • NRA Life, SAF, Constitutionalist
  • Top Forum Member
  • *****
  • Posts: 13068
  • DRTV Ranger
  • Liked:
  • Likes Given: 1014
Re: 3D printed suppressor for sale
« Reply #2 on: October 31, 2017, 07:13:53 PM »
Nice unit, but at basically a grand for the standard thread-on, plus the $200 tax...... I think I'll pass.
"I expect perdition, I always have. I keep this building at my back, and several guns handy, in case perdition arrives in a form that's susceptible to bullets. I expect it will come in the disease form, though. I'm susceptible to diseases, and you can't shoot a damned disease." ~ Judge Roy Bean, Streets of Laredo

For the Patriots of this country, the Constitution is second only to the Bible for most. For those who love this country, but do not share my personal beliefs, it is their Bible. To them nothing comes before the Constitution of these United States of America. For this we are all labeled potential terrorists. ~ Dean Garrison

"When it comes to the enemy, just because they ain't pullin' a trigger, doesn't mean they ain't totin' ammo for those that are."~PegLeg

Big Frank

  • NRA Benefactor Member
  • Top Forum Member
  • *****
  • Posts: 9463
  • DRTV Ranger
  • Liked:
  • Likes Given: 1048
Re: 3D printed suppressor for sale
« Reply #3 on: October 31, 2017, 10:55:51 PM »
I don't want to buy anything that requires more paperwork than a regular firearm purchase. The government has too much information on me as is. Michigan has had handgun registration for over 100 years and I don't like the state knowing what I have. I don't want to be on one more government list.
""It may be laid down as a primary position, and the basis of our system, that every Citizen who enjoys the protection of a free Government, owes not only a proportion of his property, but even his personal services to the defence of it, and consequently that the Citizens of America (with a few legal and official exceptions) from 18 to 50 Years of Age should be borne on the Militia Rolls, provided with uniform Arms, and so far accustomed to the use of them, that the Total strength of the Country might be called forth at a Short Notice on any very interesting Emergency." - George Washington. Letter to Alexander Hamilton, Friday, May 02, 1783

THE RIGHT TO BUY WEAPONS IS THE RIGHT TO BE FREE - A. E. van Vogt, The Weapon Shops of Isher

nosimij

  • Active Forum Member
  • ***
  • Posts: 81
  • Liked:
  • Likes Given: 0
Re: 3D printed suppressor for sale
« Reply #4 on: January 22, 2019, 11:46:32 AM »
Ok I had to look.  This is not a material that will run in a table top 3D printer.  This is printed in a printer that uses a laser to weld the material together.  The Engineer in me is thrilled to know the technology exists and has been around for a while.  Another side of me is both gad and sad to see that this is cost prohibitive printing technology. There will not be the fight about 3D printing suppressor parts.  They will be able to make some new designs and learn more about the flow and effect of the gasses moving through the suppressor but this is not coming to a garage near you any time soon. 

Boo

Also we do not need another technology stopped from stupid fear.

Sponsor

  • Guest
Re: 3D printed suppressor for sale
« Reply #5 on: Today at 02:17:39 AM »

TAB

  • DRTV Rangers
  • Top Forum Member
  • *
  • Posts: 9964
  • Liked:
  • Likes Given: 92
Re: 3D printed suppressor for sale
« Reply #5 on: January 22, 2019, 06:54:28 PM »
It works just like the if cured resins.  You have a  box full of highly powdered metal. A laser melts said powder in very small layers.  After each layer a very thin layer of metal powder is applied, repeat.  Just look on YouTube for metal 3d printer.  You will find one.
I always break all the clay pigeons,  some times its even with lead.

Rastus

  • Mindlessness Fuels Tyranny
  • Top Forum Member
  • *****
  • Posts: 6769
  • DRTV Ranger
  • Liked:
  • Likes Given: 563
Re: 3D printed suppressor for sale
« Reply #6 on: March 08, 2019, 09:24:01 AM »
Aw, heck...that is way cool.  I read the product brochure but I need to see the comparison on sound levels with other manufacturers.  They really should be able to add design tweaks that are either impossible or near impossible to achieve with regular machining. 

**-Later note:  Disappointingly, reviews I read indicated the noise reduction was sub-par compared to other models.
Necessity is the plea for every infringement of human freedom.
It is the argument of tyrants; it is the creed of slaves.
-William Pitt, British Prime-Minister (1759-1806)
                                                                                                                               Avoid subjugation, join the NRA!

Big Frank

  • NRA Benefactor Member
  • Top Forum Member
  • *****
  • Posts: 9463
  • DRTV Ranger
  • Liked:
  • Likes Given: 1048
Re: 3D printed suppressor for sale
« Reply #7 on: March 08, 2019, 04:37:21 PM »
Well, that sucks. They said, "Typically Reduces a 5.56 round by 30dB & 300BLK by 40dB, depending on barrel length and environmental conditions". I don't know how that compares to other suppressors. If they need to modify the design to make it work better that would be easy enough.
""It may be laid down as a primary position, and the basis of our system, that every Citizen who enjoys the protection of a free Government, owes not only a proportion of his property, but even his personal services to the defence of it, and consequently that the Citizens of America (with a few legal and official exceptions) from 18 to 50 Years of Age should be borne on the Militia Rolls, provided with uniform Arms, and so far accustomed to the use of them, that the Total strength of the Country might be called forth at a Short Notice on any very interesting Emergency." - George Washington. Letter to Alexander Hamilton, Friday, May 02, 1783

THE RIGHT TO BUY WEAPONS IS THE RIGHT TO BE FREE - A. E. van Vogt, The Weapon Shops of Isher

Rastus

  • Mindlessness Fuels Tyranny
  • Top Forum Member
  • *****
  • Posts: 6769
  • DRTV Ranger
  • Liked:
  • Likes Given: 563
Re: 3D printed suppressor for sale
« Reply #8 on: March 10, 2019, 09:08:41 AM »
You would think so, wouldn't you?
Necessity is the plea for every infringement of human freedom.
It is the argument of tyrants; it is the creed of slaves.
-William Pitt, British Prime-Minister (1759-1806)
                                                                                                                               Avoid subjugation, join the NRA!

Big Frank

  • NRA Benefactor Member
  • Top Forum Member
  • *****
  • Posts: 9463
  • DRTV Ranger
  • Liked:
  • Likes Given: 1048
Re: 3D printed suppressor for sale
« Reply #9 on: March 10, 2019, 02:32:19 PM »
It's not like they have to make a new set of dies to stamp out different baffles or anything. A little change to the program and it's ready to go. It seems like they could design it to work better than any other suppressor.
""It may be laid down as a primary position, and the basis of our system, that every Citizen who enjoys the protection of a free Government, owes not only a proportion of his property, but even his personal services to the defence of it, and consequently that the Citizens of America (with a few legal and official exceptions) from 18 to 50 Years of Age should be borne on the Militia Rolls, provided with uniform Arms, and so far accustomed to the use of them, that the Total strength of the Country might be called forth at a Short Notice on any very interesting Emergency." - George Washington. Letter to Alexander Hamilton, Friday, May 02, 1783

THE RIGHT TO BUY WEAPONS IS THE RIGHT TO BE FREE - A. E. van Vogt, The Weapon Shops of Isher

 

SMF spam blocked by CleanTalk