Author Topic: 6.5 Grendel Build and Optics  (Read 17745 times)

gemihur

  • wildcatter & shootist
  • Forum Member
  • **
  • Posts: 12
  • I shoot, therefore I am.
  • Liked:
  • Likes Given: 9
Re: 6.5 Grendel Build and Optics
« Reply #10 on: February 28, 2019, 06:03:36 PM »

Back to the Grendel, I've grown quite fond of handling the medium bore cartridges with a marginal size case such as 6.8 SPC, 6.5 Grendel, and 6mm TCU. I started with them in the contender platform but by a friend's insistence decided to build an AR in the 6.5 G. I build my brass from RP 7.62x39 because it comes with small primer pockets (less brisance). The heavy for bore bullets that I shoot require full utilization of propellant space remaining and small rifle magnum primers. Bill Alexander, it's designer, is a few miles down the road from here operating Alexander Arms out of the Radford Arsenal in VA. Rumor has it he's working on an operation in the nearby Dublin community but that started 5 yrs. ago and they are stilll at the Arsenal today. Enuff chit-chat here's my rifle:
modeled after the .264 LBC Ultimate Varminter
shown here with a custom stainless steel forearm being fitted to barrel nut.
If shooting a large caliber,
Use two hands!
Thanks,
Jimmy

Rastus

  • Mindlessness Fuels Tyranny
  • Top Forum Member
  • *****
  • Posts: 6769
  • DRTV Ranger
  • Liked:
  • Likes Given: 563
Re: 6.5 Grendel Build and Optics
« Reply #11 on: May 18, 2019, 06:37:48 AM »
I missed this post and picture!  It's interesting that you build your brass you must have a heck of a setup for reloading. 

Alexander Arms builds an AR platform in 17HMR but it's been a bit out of my price range....any chance you locals get discounts???    ;D
Necessity is the plea for every infringement of human freedom.
It is the argument of tyrants; it is the creed of slaves.
-William Pitt, British Prime-Minister (1759-1806)
                                                                                                                               Avoid subjugation, join the NRA!

gemihur

  • wildcatter & shootist
  • Forum Member
  • **
  • Posts: 12
  • I shoot, therefore I am.
  • Liked:
  • Likes Given: 9
Re: 6.5 Grendel Build and Optics
« Reply #12 on: November 11, 2020, 11:12:10 AM »
Pic posted now. There is no discounts for local affiliation with Alexander Arms, sorry.
I shoot contender, therefore I reload due to to the range of wildcats available.
Changing brass neck and shoulders is some of the easier adjustments with dies.
Fire-forming is required of many of the chambers to convert brass from parent design
Here's a looney forearm on a special needs barrel
If shooting a large caliber,
Use two hands!
Thanks,
Jimmy

Big Frank

  • NRA Benefactor Member
  • Top Forum Member
  • *****
  • Posts: 9463
  • DRTV Ranger
  • Liked:
  • Likes Given: 1048
Re: 6.5 Grendel Build and Optics
« Reply #13 on: November 11, 2020, 11:35:08 PM »
Somewhere a carbine is missing its handguard. ;)
""It may be laid down as a primary position, and the basis of our system, that every Citizen who enjoys the protection of a free Government, owes not only a proportion of his property, but even his personal services to the defence of it, and consequently that the Citizens of America (with a few legal and official exceptions) from 18 to 50 Years of Age should be borne on the Militia Rolls, provided with uniform Arms, and so far accustomed to the use of them, that the Total strength of the Country might be called forth at a Short Notice on any very interesting Emergency." - George Washington. Letter to Alexander Hamilton, Friday, May 02, 1783

THE RIGHT TO BUY WEAPONS IS THE RIGHT TO BE FREE - A. E. van Vogt, The Weapon Shops of Isher

tombogan03884

  • Guest
Re: 6.5 Grendel Build and Optics
« Reply #14 on: November 12, 2020, 10:19:10 AM »
Gemihur, Did you work there ?
Or are you just a dedicated fan ?  ;D
Asking because I did and might, probably, know you.   ;D

Sponsor

  • Guest
Re: 6.5 Grendel Build and Optics
« Reply #15 on: Today at 05:06:34 AM »

gemihur

  • wildcatter & shootist
  • Forum Member
  • **
  • Posts: 12
  • I shoot, therefore I am.
  • Liked:
  • Likes Given: 9
Re: 6.5 Grendel Build and Optics
« Reply #15 on: June 26, 2021, 06:47:01 PM »
No, I've never worked in the firearms industry.
Graphics has been my game
I just dig the cartridge designs of wildcats.
And enjoy shaping wood
Presently trying to tweak some loads for my new 30 Raptor from Reeder

I hope I know ya' Tom, I'm in the star city.
Thanks,
Jimmy
If shooting a large caliber,
Use two hands!
Thanks,
Jimmy

 

SMF spam blocked by CleanTalk